Car Liquid testing Brake Fluid Tester Pen for DOT3/DOT4 Car Diagnostic Tools 5 LED Oil Quality Check Pen Brake Fluid Tester
Car Liquid testing Brake Fluid Tester Pen for DOT3/DOT4 Car Diagnostic Tools 5 LED Oil Quality Check Pen Brake Fluid Tester
UKOBD2 Provide top quality Car Liquid testing Brake Fluid Tester Pen for DOT3/DOT4 Car Diagnostic Tools 5 LED Oil Quality Check Pen Brake Fluid Tester, if you need Car Liquid testing Brake Fluid Tester Pen for DOT3/DOT4 Car Diagnostic Tools 5 LED Oil Quality Check Pen Brake Fluid Tester, or have any questions about Car Liquid testing Brake Fluid Tester Pen for DOT3/DOT4 Car Diagnostic Tools 5 LED Oil Quality Check Pen Brake Fluid Tester, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of Car Liquid testing Brake Fluid Tester Pen for DOT3/DOT4 Car Diagnostic Tools 5 LED Oil Quality Check Pen Brake Fluid Tester
Advantage of new version:
1.The probes and pen cap use more durable materials to make them not easy to loosen and fall.
2.Changing the placement position of the batteries, which makes them easier to replace and better protected.
3.It is blister packing,high quality, has better protection during transportation and avoids damage.
Highlight:
A.Designed for checking the quality of brake fluide quality simply.
B.5 LEDs to indicate percentage of water in the brake fluid.
C.Automatically power off.
D.Small and light to carry for more convenience.
Function:
Brake fluid detection pen is based on the change in conductivity to determine the moisture change brake fluid. It shows clearly the extent of moisture contained by the light-emitting diode, high moisture content will lead to lower boiling point, affect braking performance:
1.The green LED lights = water content in the brake fluid H2O <1.5%, brake fluid qualified.
2.The yellow LED lights = brake fluid water content H2O = 1.5% to 3%, can continue to use, test again six months later.
3.The red LED lights = water content in the brake fluid H2O> 3%, can not continue to use the brake fluid needs to be replaced.
4.LED red flashing: battery replacement.
5.LED yellow: low moisture content, check again in six months.
6.LED green: brake fluid lines/cell row.
Technical parameters:
Green: Battery OK, that is, brake fluid does not contain water
Green/yellow: brake oil in water content of less than 1%, better brake fluid performance, ease of use.
Green/yellow/yellow: brake oil in water content of about 2%, brake fluid can continue to use.
Green/yellow/yellow/red: brake oil in water content of about 3%, the proposed replacement of brake fluid.
Green/yellow/yellow/red/red: brake oil in water content of at least 4%, the brake fluid must be replaced immediately responsible for very dangerous.
Specification:
Type: Brake fluid tester.
Material: Light emitting diode.
Quantity:1pc.
Item Color: Black/White.
Compatible with: All vehicles.
Battery : Black:1*LR03 AAA 1.5V battery (not included).
White:2*LR44 1.5V battery (not included).
Brake fluid type:Testing DOT 3, DOT4, DOT5.
Size:Black:15.5*2.5cm.
White:15.9*1.3cm.
Net Weight: 0.04kg/1.4oz.
Go to Buy: Car Liquid testing Brake Fluid Tester Pen for DOT3/DOT4 Car Diagnostic Tools 5 LED Oil Quality Check Pen Brake Fluid Tester