Features

• 100% brand new and high quality.

• This injector tester can be used to help identify stuck, leaked or burned out conditions,it uses 12V vehicle battery for power.

• Large LED display/4 Pulse Modes. Test Lead: 41.5cm / 16.3 inches.

• It can work with any fuel pressure tester, easily to clean most car motorcycle fuel injectors.

• It will help us clean and test the injectors of gasoline cars and motorcycles.

• The engine of the car must be turned off before using this instrument.

Specifications:

• Power Supply: 12V vehicle battery

• Operation Environment: 0-40°C,relative humidity < 80%

• Storage Environment: -20°C ~50°C, relative humidity<85%

• Size: As the picture show

Explanations for 4 modes:

• Mode 1: the tester outputs 1 pulse, whose pulse width is about 255ms

• Mode 2: the tester outputs 50 pulse, every pulse's pulse width is about 7ms

• Mode 3: the tester outputs 100 pulse, every pulse's pulse width is about 3.5ms

• Mode 4: the tester outputs pulse continuously at the rate of 50 pulses per about 1450ms, every pulse's pulse width is about 7ms

Package Included:

• 1 x Fuel Injector Tester

• 1x Manual