Mini Brake Fluid Liquid Tester Brake Fluid Tester Pen With 5 LED Accurate Oil Quality Check Pen Diagnostic Tools For DOT3/DOT4
Mini Brake Fluid Liquid Tester Brake Fluid Tester Pen With 5 LED Accurate Oil Quality Check Pen Diagnostic Tools For DOT3/DOT4
UKOBD2 Provide top quality Mini Brake Fluid Liquid Tester Brake Fluid Tester Pen With 5 LED Accurate Oil Quality Check Pen Diagnostic Tools For DOT3/DOT4, if you need Mini Brake Fluid Liquid Tester Brake Fluid Tester Pen With 5 LED Accurate Oil Quality Check Pen Diagnostic Tools For DOT3/DOT4, or have any questions about Mini Brake Fluid Liquid Tester Brake Fluid Tester Pen With 5 LED Accurate Oil Quality Check Pen Diagnostic Tools For DOT3/DOT4, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of Mini Brake Fluid Liquid Tester Brake Fluid Tester Pen With 5 LED Accurate Oil Quality Check Pen Diagnostic Tools For DOT3/DOT4
Brake Fluid Liquid Tester Pen With 5 LED Vehicle Diagnostic Tool For DOT3/DOT4
Features:
1.check the car brake oil quality
2.5 LED lights display the percentage of moisture content in brake fluid,how the test results more accurate
3.Press the button for power on, green LED will light up.
4.Insert the tester into reservoir for a second , then the results will be indicated correctly by LEDs.
5.Testing DOT 3, DOT4, DOT5 brake fluid
6.auto power off,Supports 1 LR03 AAA batteries (not included)
Instructions:
Brake fluid detection pen is based on the change in conductivity to determine the moisture change brake fluid. It shows clearly the extent of moisture contained by the light-emitting diode, high moisture content will lead to lower boiling point, affect braking performance. Red indicates the brake fluid needs immediate replacement, green represents good condition, yellow indicates the state is acceptable but soon replaced.
LED Indicator Display:
1.The green LED lights = water content in the brake fluid H2O <1.5%, brake fluid qualified
2.The yellow LED lights = brake fluid water content H2O = 1.5% to 3%, can continue to use, test again six months later
3.The red LED lights = water content in the brake fluid H2O> 3%, can not continue to use the brake fluid needs to be replaced
Red LED: change brake fluid
4.LED red flashing: battery replacement
5.LED yellow: low moisture content, check again in six months
6.LED green: brake fluid lines / cell row
Technical parameters:
Green: Battery OK, that is, brake fluid does not contain water
Green / yellow: brake oil in water content of less than 1%, better brake fluid performance, ease of use.
Green / yellow / yellow: brake oil in water content of about 2%, brake fluid can continue to use.
Green / yellow / yellow / red: brake oil in water content of about 3%, the proposed replacement of brake fluid.
Green / yellow / yellow / red / red: brake oil in water content of at least 4%, the brake fluid must be replaced immediately responsible for very dangerous.
Package List:
1 x a brake fluid tester (Battery not included)