ECU Decoder for Renault Free Shipping

Renault ECU decoder, From the year 1994 most Renault cars are equipped with engine immobilizer system and it makes replacement of injection computer more complicated. There is no problem if replacement ECU is bought from Renault service dealer - it is sold with no immobilizer code stored, but replacing damaged computer with used one is impossible because of mismatch of unlocking codes.

UKOBD2 Provide top quality ECU Decoder for Renault Free Shipping, if you need ECU Decoder for Renault Free Shipping, or have any questions about ECU Decoder for Renault Free Shipping, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of ECU Decoder for Renault Free Shipping

ECU Decoder for Renault

With the entire year 1994 the majority of Renault vehicles tend to be prepared along with motor immobilizer program also it can make alternative associated with shot pc much more complex. There isn't any difficulty in the event that alternative ECU is actually purchased through Renault support seller -- it's offered without any immobilizer signal saved, however changing ruined pc along with utilized the first is unattainable due to mismatch associated with unlocking rules.

Decoding tool has several modes of operation and deals with all known petrol and diesel injection systems, introduced in range of year 1994-2001 without intervention in to the ECU (diesel coded anti-start valve as well). After decoding process is completed, control unit became de coded - as it was bought from dealer. ECU must be taken out from the car and connected to the decoding tool according to user manual.

Tested System for Renault ECU Decoder:



Decoding of engine control units manufactured in range of year 1994-1996 is semi-automatic, from year 1996 - fully automated. Especially this tool can be useful when rubber-filled FENIX5, SAFIR2 or coded diesel anti-start valve must be decoded. This tool will decode all listed type 1 and 2 immobilizer systems..

Buying this tool you will be supplied with all required

information: user manual and connection diagrams. Decoding tool is stand-alone, no PC is required.

The following ECU’s will need a valid immo code:

Some of FENIX5 for LAGUNA/SAFRANE 2.0l 16V

All of SIRIUS32 except for KANGOO 1.4l 16V - You can attach the immo emulator on this ECU after decoding

LUCAS DCU3R, Bosch MSA15.5 and EDC15C3

This means that after the decoding procedure on one of these ECU is done, you must have the immobilizer system fully operational (matching key) to start the engine.

Otherwise after decoding the above ECU’s you can use a Renault emulator

Package including:

1pc x Renault ECU Decoder

Go to Buy: ECU Decoder for Renault Free Shipping