PHS-3C Multi-parameter ph meter Desktop Automatic Calibration Acidity Meter PH/Temp 2 In 1 PH Tester Water Quality Analyzer
PHS-3C Multi-parameter ph meter Desktop Automatic Calibration Acidity Meter PH/Temp 2 In 1 PH Tester Water Quality Analyzer
UKOBD2 Provide top quality PHS-3C Multi-parameter ph meter Desktop Automatic Calibration Acidity Meter PH/Temp 2 In 1 PH Tester Water Quality Analyzer, if you need PHS-3C Multi-parameter ph meter Desktop Automatic Calibration Acidity Meter PH/Temp 2 In 1 PH Tester Water Quality Analyzer, or have any questions about PHS-3C Multi-parameter ph meter Desktop Automatic Calibration Acidity Meter PH/Temp 2 In 1 PH Tester Water Quality Analyzer, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of PHS-3C Multi-parameter ph meter Desktop Automatic Calibration Acidity Meter PH/Temp 2 In 1 PH Tester Water Quality Analyzer
PHS-3C Multi-parameter ph meter Desktop Automatic Calibration Acidity Meter PH/Temp 2 In 1 PH Tester Water Quality Analyzer
The PHS-3C pH meter is a portable microprocessor-based pH/temperature meter. The handy key board for the selection of the various functions. The possibility of automatically correcting errors in measurement due to temperature and the extreme simplicity of regulation all serve to permit a rapid and reliable execution of calibration and measurement.The display on the front panel reveals the temperature pH readings taken by the instrument. The instrument comes supplied with a combined pH electron and a probe for the measurement and compensation of the temperature.
1.Range:
PH: 0.00-14.00PH
Temp: 0-100℃
2.Resolution ：
РH: 0.01PH
Temp: 0.1℃
3.Accuracy：
PH: ±0.02PH
Temp: ±0.5℃
4.Display：
PH: 4-digital LED
Temp: 3-digital LED
5.Automatic Temperature Compensation:0℃-50℃
6.Power Supply: In Label
7.Operating Temperature: 0℃-50℃
8.Calibration: 2 points with auto bufferrecognition
1.Connecting AC power supply. Turn on the meter by"ON-OEF" switch located back ofthe instrumen.
2.Connect the electrode to the iack back of the instrument.
3.Remove the protective cap of electrode. Put the electrode into the measured solution to be tested.