ST59 Plug for Digiprog 3 Digiprgo3 Used for NEC Cluster Vehicles

ST59 Plug works together with DIGIPROG3 odometer correction tool, used on vehicles with NEC chips, like Ford, Renault and so on.We use cardiag.ru solution to make this ST59 plug, has been tested by different countries customer.Easy connect and operation.

UKOBD2 Provide top quality ST59 Plug for Digiprog 3 Digiprgo3 Used for NEC Cluster Vehicles, if you need ST59 Plug for Digiprog 3 Digiprgo3 Used for NEC Cluster Vehicles, or have any questions about ST59 Plug for Digiprog 3 Digiprgo3 Used for NEC Cluster Vehicles, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of ST59 Plug for Digiprog 3 Digiprgo3 Used for NEC Cluster Vehicles

ST59 Plug for Digiprog 3 Used for NEC Cluster Vehicles

Compatible with digiprog3 any version.

Installation example: FORD NEC

1. Remove the dashboard and open it . Search on dash the Soldering Points.
2. solder on same points as in picture the cables from ST59 on it. All Pins must be Lift up From Board
3. Connect the Cables to ST59 you can nothing make Wrong
4. Now connect the ST 59 with the Digiprog.
5. Select the program: cars / trucks - FORD - KA NEC.
6. The DIGIPROG denotes old / wrong Mileage.
7. Program and completed the new / correct Mileage.

CABLE COLOURS NOTE:


1. BROWN
2. RED
3. ORANGE
4. YELLOW
5. GREEN
6. BLUE
7. PURPLE
8. GREY
9. KNOWS
10. BLACK
11. BROWN
12. RED
13. ORANGE
14. YELLOW

Package including:

1pc x ST59 Plug

Go to Buy: ST59 Plug for Digiprog 3 Digiprgo3 Used for NEC Cluster Vehicles