Toyo-ta G and Toyo-ta H Chip Vehicle OBD Remote Key Programming Device

Toyo-ta G and Toyo-ta H Chip Vehicle OBD Remote Key Programming Device,Supports programming both Toyo-ta G and Toyo-ta H chip vehicle via OBD2 port.Free shipping to all over the world.

UKOBD2 Provide top quality Toyo-ta G and Toyo-ta H Chip Vehicle OBD Remote Key Programming Device, if you need Toyo-ta G and Toyo-ta H Chip Vehicle OBD Remote Key Programming Device, or have any questions about Toyo-ta G and Toyo-ta H Chip Vehicle OBD Remote Key Programming Device, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of Toyo-ta G and Toyo-ta H Chip Vehicle OBD Remote Key Programming Device


Toyo-ta G and Toyo-ta H Chip Vehicle OBD Remote Key Programming Device

Top 3 Reasons to get Toyo-ta G and Toyo-ta H Chip Vehicle OBD Remote Key Programmer

1.For 4D67,68,72(G), supports both G and H chip, tested on 2015 Camry

2.Programs both Toyo-ta G and Toyo-ta H chip vehicle via OBD2 port.

3.Free shipping to all over the world.

How to use Toyo-ta G and H chip OBD remote Key Programmer

Toyo-ta add remote control

Get in the car and close the door, insert the key and turn on the key, insert the device into OBD. After the sound(Dee-), it will start to add the remote control.
After the sound ( Dee- Dee-),open the door, when hear the sound blaring. Press ‘ lock & unlock’ key at the same time. And press the’ lock’ key. If the blaring ends, It’s OK.

Note: Switch is on the right.(add remote control)

Toyo-ta add transponder:

Get in the car and close the door, insert the main key into the lock and turn the key on,and then insert the device into the OBD. If it will sound twice, it will start to add transponder.
After the sound (Dee-Dee-), 2-3 minutes later, anti-theft light is on. And then remove the key( anti-theft light will flash), insert the new key and doesn’t need turn the key,anti-theft light will be off later.

Note: switch is on the left.( add transponder)

Customer Feedback:

Product worked as advertised. Programmed 2 Toyo-ta Corolla (2014) keys for $100 total. ($for tool, $35 each for 2 keys,$5 to get keys cut at locksmith).
This is a 2 step process-Transponder programmer to have the key work with the car's security system and Remote programmer to have the lock/Unlock/Trunk/Emergency for key buttons to work with car. This unit handles both programming tasks.
Toyo-ta wanted $350 per key, local locksmith wanted $250 for 2 keys. This device save me much.

Package including:

1pc x Toyo-ta G and H OBD Remote Key Programmer

Go to Buy: Toyo-ta G and Toyo-ta H Chip Vehicle OBD Remote Key Programming Device

Tags: Toyota G chip, Toyota h chip , Toyota Key Programming , toyota key programmer
Prev: Original SuperOBD V5.0 SKP-900 SKP900 Hand-Held OBD2 Auto Key Programmer
Next: Newest V45.09 CK-100 CK100 Auto Key Programmer With 1024 Tokens Supports Cars Till 2014.09