USB+SD MP3(2x6Pin) for Toyota

USB+SD MP3(2x6Pin) for Toyota delivers CD-quality sound directly into the factory sound system via the CD changer port, without the loss of sound quality that occurs with existing cassette and FM transmitter solutions.We supply USB+SD MP3 Adapter with unlimited technical support.

UKOBD2 Provide top quality USB+SD MP3(2x6Pin) for Toyota, if you need USB+SD MP3(2x6Pin) for Toyota, or have any questions about USB+SD MP3(2x6Pin) for Toyota, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of USB+SD MP3(2x6Pin) for Toyota

USB+SD MP3(2x6Pin) for Toyota

Directly control from car stereo panel, user only need a SD card or USB disk, then you enjoy the digital music (MP3/WMA) in your car, Aux input for external audio sources, Auxiliary devices such as MP3 players, Potable DVD players, MiniDisk Player, handheld gaming systems, notebook computers and IPHONE can be added to the OEM radio while delivering optimum sound quality.

Features:

1. Plug&play, CDC alternative
2. Connected with wire harness, not FM signal controlled ,Hi-Fi guaranteed
3. Controlled by vehicle Head Unit, support Steering wheel operation
4. With imported Hi-Fi Decoding Chip, perfectly support MP3 and WMA tracks
5. Supports SD/SDHC/MMC card/U Disk/Card Reader/Hard Disk
6. Supports external audio source(MP3 MP4 PSP Mobile Phone) via AUX in port
7. Playlist function same as multi CDs
8. Supports Last Position Memory (LPM)
9. Vibration and interference proof
10. Easy to install, no damage to original car decorations for different car models or car radios

Compatible with:

4Runner 2003-2010,
Avalon 2005-2010,
Camry 2005-2010,
Celica 2003-2010,
Corolla 2005-2011,
FJ Cruiser 2007-2010,
Highlander 2004-2010,
Landcruiser 2003-2010,
Matrix 2003-2010,
MR2 2004-2010,
Prius 2004-2010,
RAV4 2003-2010,
Sequoia 2005-2010,
Sienna 2004-2010,
Solara 2004-2010,
Tacoma 2005-2010,
Tundra 2004-2010,
Venza 2009-2010,
Vitz 2006-2010,
Yaris 2006-2010

Scion:

xA (2004---),
xB (2004---),
tC (2005---)

Lexus:

ES 300/330 2007-2010,
S 250/300/350 2006-2010,
GS 300/400/430/450H 2006-2010,
GX 470 2004-2009,
LS 460 2007-2010,
LX 570 2008-2010,
RX 300/330/350/400H 2004-2009,
SC 430 2005-2010


IMPORTANT Noticing:

1.Fits Toyota OEM radios by Panasonic: 16852 ,12821 ,13803 ,17006 ,17828 ,50323 ,53816 ,53818 ,58814 , 58816 ,58827, P3914 ,P3916 ,P7809 , A56828 , W53901 ,W53903, W53905, W58810, W58814, W58831, B9002 Navigation System,
2.Compatible with Toyota Navigation System

Cable to connect cd changer port:

Available Solutions:

For OEM radios: VW, Audi, Toyota, Honda, Mazda, BMW, Hyundai, Kia, Acura, Lexus, Skoda Citroen, Fiat, Volvo, Mercedes, Nissan, Suzuki, Ford, Renault etc

For after market radios: Clarion ,Alpine, Blaupunkt, Sony, Sanyo, Panasonic, Pioneer, Becker, JVC etc

Installation Guide:

1. Pull out the unit from the car and touch the back of the unit for CDC port when the ignition is switched of.
2. Insert the CDC plug into the original car port correspondingly. Then insert the storage card.
3. Then check if the device works normally or not after power supply given from the car itself.
4. Put the wire harness into the proper and good place after the test successfully.


Package including:

• Digital CD Changer
• OEM compatible harness to connect to the back of the car stereo
• 3.5 mm Male / Male Audio cable
• Installation manual

Go to Buy: USB+SD MP3(2x6Pin) for Toyota

Tags: toyota mp3 adapter, toyota mp3 usb , toyota cd changer , toyota usb+sd mp3 adapter 2x6pin , Toyota mp3 player
Prev: RD3 radio USB+SD MP3 Adapter Interface for Peugeot & Citroen
Next: VIDENT iLink400 GM Chevrolet Cadillac Buick Vident Scan Tool iLink400 Diagnostic Scanner Code Reader