VXDIAG BENZ C6 Xentry Diagnostic VCI DoIP Multi Diagnostic Tool for Benz With Software HDD Supports WiFi

ALLScanner VXDIAG BENZ C6 Supports Benz With HDD, Benz software include two versions of PASSTHRU & PDU, including DAS, Xentry software. Version of PDU support new car models of 222, 213, 205 etc, other car models need to usepassthru version to diagnose. Not support old models of 210, 203, 220 with K-Line communication. It support connections of WIFI, LAN and USB.

UKOBD2 Provide top quality VXDIAG BENZ C6 Xentry Diagnostic VCI DoIP Multi Diagnostic Tool for Benz With Software HDD Supports WiFi, if you need VXDIAG BENZ C6 Xentry Diagnostic VCI DoIP Multi Diagnostic Tool for Benz With Software HDD Supports WiFi, or have any questions about VXDIAG BENZ C6 Xentry Diagnostic VCI DoIP Multi Diagnostic Tool for Benz With Software HDD Supports WiFi, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of VXDIAG BENZ C6 Xentry Diagnostic VCI DoIP Multi Diagnostic Tool for Benz With Software HDD Supports WiFi

ALLScanner VXDIAG BENZ C6 Diagnostic Tool Supports BENZ With Software HDD

VXDIAG BENZ C6 for BENZ Function Introduction:

BENZ software include two versions of PASSTHRU & PDU, including DAS, Xentry software. Version of PDU support new car models of 222, 213, 205 etc, other car models need to usepassthru version to diagnose. Not support old models of 210, 203, 220 with K-Line communication. It support connections of WIFI, LAN and USB.

Compatible Software: VXDIAG XENTRY/Das Software
Support Vehicle: Mercede For Benz & Smart vehicles
DoIP: Support DoIP
Functions: Star Diagnostic & programming (SCN Coding)

VXDIAG Benz C6 Xentry Language List:

VXDIAG Xentry Diagnostic VCI for Benz Product Features:

Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
Assyst & ASSYST + systems


VXDIAG C6 DOIP Summary:
The new VXDIAG For XENTRY Diagnosis VCI (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.

The VXDIAG For XENTRY Diagnosis VCI does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.
Notice :
1.Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken and need to ship HDD back to us to copy software again.
2.You also can watch more videos to get more technical support from official website: http://www.vxdiag.net

3.This VXDIAG can/'t support All Key Lost,needs one key at least.

PC Requirement:

Processor: Pentium 4 / 1.6GHz+.
Memory: 1G Bytes or more.
Hard disk: 40G or more.
Display: Resolution 1024x768 or higher.
Network interfaces: LAN 10 / 100M or 802.11b / g.
Communication Interface: USB2.0 or USB3.0


Specification:
Item State
RAM 32bit180MHz ARM
FLASH 1MByte FALSH
Diagnostic Port 24PIN, self-determination design
LED 4 LED indicator light,indicate power and status.
Power DC 9V-36V
Consumption 3W
Working Temperature -20°C~70 °C
Storage Temperature -40°C~85 °C
Warranty: One Year


Xentry Diagnostic VCI Benz C6 Update:

2018.05.14 V3.0.1.508
* Release XENTRY Diagnosis VCI (C6) driver for XENTRY XDOS 2018.05

Xentry Diagnostic VCI Benz C6 Software Display:

Packing List:

1pc x BENZ C6 ALLSCANNER VXIDAG Main Unit
1pc x OBD cable
1pc x USB cable
1pc x Network cable
1pc x 500GB hard drive

Go to Buy: VXDIAG BENZ C6 Xentry Diagnostic VCI DoIP Multi Diagnostic Tool for Benz With Software HDD Supports WiFi