Autel PowerScan PS100

The AutoLink AL519 OBDII/EOBD Scanner supports all 10 modes of OBDII test for a complete diagnosis. Featuring the unique patented One-Click I/M Readiness Key, TFT color display and built-in speaker, the AutoLink AL519 is truly the ultimate in power and affordability, allowing users to do their jobs faster. In addition, thousands of troubleshooter code tips help technicians to save diagnosis and repair time.

Works on ALL 1996 and newer vehicles (OBDII & CAN) – domestic and import Features the unique patented One-Click Readiness Key for quick State Emissions readiness check and drive cycle verification Bright color coded LEDs and built-in speaker provide both visual and audible tone for readiness verification Retrieves generic (P0, P2, P3 and U0), manufacturer specific (P1, P3 and U1) codes and pending codes Easily determines the cause of the Check Engine Light(MIL) Turns off Check Engine Light (MIL), clears codes and resets monitors Displays DTC definition on the TFT color screen Views freeze frame data Displays monitor and I/M readiness status (emissions) Reads live PCM datastream Displays live O2 sensor test data Graphs data (1996 and newer vehicles) Reads, stores and playbacks live sensor data Enhanced OBDII Mode 6 Troubleshooter code tips guide technicians to the root cause of a trouble code faster, saving diagnosis and repair time Retrieves vehicle information (VIN, CIN and CVN) Multilingual menu and DTC definitions Internet updateable and upgradeable

Performs every type of service including power injection, measurement, ground testing, polarity checks, continuity testing and components activation
Easy to read AVOmeter allows you to read voltage, current and resistance at the fingertip
With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, relays, etc.
Simultaneously uses the hot lead and the ground lead to activate components right in your hand
Instantly identifies positive, negative and open circuits
Tests for bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fuses
Instantly checks continuity of switches, relays and diodes
Circuit breaker protected
Built-in Flashlight enables you to work in the dark
Audio tone indicator allows for no-look menu scrolling once users are familiar with menu tone assignment
20ft (extendable) cable provides excellent accessibility to test along the vehicle
Extremely easy to use and highly reliable

There are four modes to diagnose the electrical systems, which can be accessed by depressing the Mode Button and cycling through each
one.

DC Voltage

While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the DC voltage with a resolution of 0.1 volt.

AC Voltage

While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the Max. voltage, the Min. voltage, frequency and duty cycle.

Resistance

While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the resistance between the tip and auxiliary ground lead.

Tone On/Off

While the tool in this mode, just do a quick press of the mode button to toggle the tone on or off. While quickly pressing (a quick press and release) the mode button, if a short high beep is heard, this means the audio tone is turned on. If a short low beep is heard, the audio tone is turned off.

This function is invaluable when working in bright areas where LED illumination alone is not sufficient. The audio feature may be disengaged when desired, such as for applications where the tool will be connected to circuits for long periods of time and the audio could become annoying.