Auto Paintless Dent Repair Tool
Professional Auto Paintless Dent Repair Remover Removal Tool Kit Car Dent Tools Slide T bar Hot Glue Tap Down Kits Lifter Tools
Professional Auto Paintless Dent Repair Remover Removal Tool Kit Car Dent Tools Slide T bar Hot Glue Tap Down Kits Lifter Tools is a one of our Auto Paintless Dent Repair Tool Tools, you can buy Professional Auto Paintless Dent Repair Remover Removal Tool Kit Car Dent Tools Slide T bar Hot Glue Tap Down Kits Lifter Tools from foxwellpro.com.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150
images of Professional Auto Paintless Dent Repair Remover Removal Tool Kit Car Dent Tools Slide T bar Hot Glue Tap Down Kits Lifter Tools
Note:Glue gun is not included in this kit
It is very distressed when there are dents in the car's surface, then you have to spend time and money to repair it. Don't you want to save time and money to repair it by yourself? Come on and try it.
Features:
Much cheaper than body shop repairs because it is no high paint material and labor costs.
Save more time and don't need wait for car dent repair in repair shop.
It is environment friendly and no chemicals or other toxic material are used in this process, paintless dent repair can insure 100% protect the original paint.
It is easy to operate, most of the dent removal can be finished in half hour.
No need to disassemble the car.
【Kit 1】
Package included:
12x Red Tabs
28x Blue Tabs
1x Gold Puller
2x Shovel
5x White Glue Sticker
5x Yellow Glue Sticks
1x Towel
1x Alcohol Bottle(Alcohol not included)
1x Hammer
10x Knocking pen
1x Tools bag
1x The Instruction
7 x Pulling bridge set
How to use the tools ?
1. Clean damage surface with a clean wet cloth;
2. Put the glue stick to gun and connect the power source and preheat for 5-10 minutes;
3. Pull the trigger and apply the suitable drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);)(Note: The larger the drawing gasket is, the larger the drawing force is);
4. Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
5. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
6. When dent was removal, clear the glue by alcohol with plastic shovel;
7. If dent still exists, knock it slightly with a flattening hammer with Tapdown head
8.Repeat the operation steps above until the dents are repaired.
It is very distressed when there are dents in the car's surface, then you have to spend time and money to repair it. Don't you want to save time and money to repair it by yourself? Come on and try it.
Features:
Much cheaper than body shop repairs because it is no high paint material and labor costs.
Save more time and don't need wait for car dent repair in repair shop.
It is environment friendly and no chemicals or other toxic material are used in this process, paintless dent repair can insure 100% protect the original paint.
It is easy to operate, most of the dent removal can be finished in half hour.
No need to disassemble the car.
【Kit 1】
Package included:
12x Red Tabs
28x Blue Tabs
1x Gold Puller
2x Shovel
5x White Glue Sticker
5x Yellow Glue Sticks
1x Towel
1x Alcohol Bottle(Alcohol not included)
1x Hammer
10x Knocking pen
1x Tools bag
1x The Instruction
7 x Pulling bridge set
How to use the tools ?
1. Clean damage surface with a clean wet cloth;
2. Put the glue stick to gun and connect the power source and preheat for 5-10 minutes;
3. Pull the trigger and apply the suitable drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);)(Note: The larger the drawing gasket is, the larger the drawing force is);
4. Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
5. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
6. When dent was removal, clear the glue by alcohol with plastic shovel;
7. If dent still exists, knock it slightly with a flattening hammer with Tapdown head
8.Repeat the operation steps above until the dents are repaired.
