DSO112A TFT Mini Digital Oscilloscope Touch Contact Screen
Portable DSO112A TFT Mini Digital Oscilloscope Touch Contact Screen Portable USB Oscilloscope Interface 2MHz 5Msps
Portable DSO112A TFT Mini Digital Oscilloscope Touch Contact Screen Portable USB Oscilloscope Interface 2MHz 5Msps is a one of our DSO112A TFT Mini Digital Oscilloscope Touch Contact Screen Tools, you can buy Portable DSO112A TFT Mini Digital Oscilloscope Touch Contact Screen Portable USB Oscilloscope Interface 2MHz 5Msps from foxwellpro.com.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150
images of Portable DSO112A TFT Mini Digital Oscilloscope Touch Contact Screen Portable USB Oscilloscope Interface 2MHz 5Msps
DSO112A TFT Mini Digital Oscilloscope Touch Screen Portable USB Oscilloscope Interface 2MHz 5Msps
Features:
A pocket oscilloscope with color display and touch panel.
2MHz analog bandwidth and 5Msps Max. real-time sampling rate.
Unique rolling slow signal display, the display can be fully continuous signal, unlike SCAN mode will cause the signal display discontinuous.
Vertical sensitivity: 2mV/Div, with high accuracy and low noises.
Can save 24 groups of preset parameters, save and recall waveform conveniently.
Measuring frequency and Max./Min./Vpp/Avg. values of voltage.
Adds external triggering function, stronger signal capture ability.
PC upload waveform data.
Freeze at any time waveform display (HOLD function).
Square wave test signal comes 1000Hz/3.3V.
Firmware upgradable via Micro USB.
Battery/USB powered, built-in smart charger.
Specifications:
Analog Frequency Bandwidth: 0-2MHz
Max. Real-time Sampling Rate: 5Msps
Vertical Sensitivity: 2mV/Div-20V/Div Total 12 grades(by way of Progressive 1-2-5)
Horizontal Time Base Range: 1μs/Div-50s/Div 21 grades(by way of Progressive 1-2-5)
Max. Input Voltage: 50Vpk (100Vpp)
Max. Record Length: 512/1024 Optional
Input Resistance: 1M ohm
ADC Precision: 8 Bit
Coupling Method: DC / AC
Trigger Type: Auto, Normal, Single
Trigger Edge: Rising / Falling Edge
Trigger Source: Internal / External
External Trigger Voltage: 0-15V
Packing list:
Low configuration:
1x Oscilloscope
2x MCX cable clamp
1x USB cable
High configuration:
1x Oscilloscope
1x MCX cable clamp
1x Bnc conversion cable
1x P6020 1/10 20Mhz probe
1x USB cable
Notes:
Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.
