Digital Multimeter

EM420A EM5511 3in1 Auto Range Digital Multimeter Voltmeter Ammeter Ohmmeter DC AC EMF Multimeter Automotive Tester

EM5511 3in1 Auto Range Digital Multimeter Voltmeter Ammeter Ohmmeter DC AC EMF Multimeter Automotive Tester is a one of our Digital Multimeter Tools, you can buy EM5511 3in1 Auto Range Digital Multimeter Voltmeter Ammeter Ohmmeter DC AC EMF Multimeter Automotive Tester from foxwellpro.com.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150

images of EM5511 3in1 Auto Range Digital Multimeter Voltmeter Ammeter Ohmmeter DC AC EMF Multimeter Automotive Tester

EM5511 3in1 Auto Range Digital Multimeter Voltmeter Ammeter Ohmmeter DC AC EMF Multimeter Automotive Tester

EM420A

Digital Multimete Continuity Diode Transistor Battery Te AC/DC Ammeter Voltmeter Ohm Portable Meter voltage meter EM420A

NOTE

This package doesnot include batteries.

Due to new rules of China Post Air, parcels must not include batteries,

otherwise it will not get through the custom.

INTRODUCTION

This series multimeters are compact 3 1/2 digits digital multimeters designed to measure DC and AC voltage, DC and AC current, resistance, diode, transistor hFE, continuity, temperature, battery ( EM420A ) and capacitance ( EM420B ). They feature polarity indication, data hold, MAX recording mode, and etc. They are easy to operate and are ideal test tools.

1.Display

3 1/2 digit LCD, with a max.reading of 1999

2.”RANGE” Button

Used to switch between autorange mode and manual range mode as well as to select desired manual range.

3.”FUNC.” Button

Used to switch the meter between: 1.DC current and AC current measurement; 2.Celsius and Fahrenheit measurement;3.Diode and continuity test function.

4.Power Switch

Used to turn on/off the meter

5.Function/Range

Switch

Used to select desired function and/or range.

6.”10A” Terminal

Plug-in connector for the red test lead for current ( 200mA – 10A ) measurements.

7.”COM” Terminal

Plug-in connector for the black test lead for voltage, current, resistance, diode, continuity, capacitance and battery measurements, also for the adapter for transistor hFE measurements. For temperature measurements, it is a plug-in connector for the negative plug of the K type thermocouple.

8.”INPUT” Terminal

Plug-in connector for the red test lead for voltage, current ( < 200mA ), resistance, diode, continuity, capacitance and battery measurements, also for the adapter for transistor hFE measurements. For temperature measurements, it is a plug-in connector for the positive plug of the K type thermocouple.

9.Backlight Button

Turn on/off the backlight. The backlight will turn off automatically about 15 seconds later after it is turned on.

10.”DATAH” Button

Used to enter/exit Data hold mode

11.”MAXH” Button

Used to enter/exit MAX recording mode.

GENERAL SPECIFICATION

Display：3 1/2-digit LCD,with a max.reading of 1999

Negative Polarity Indication: Negative sign "—" shown on the display automatically

Sampling Rate: About 2 to 3 times/sec

Low Battery Indication

Battery: 1.5V battery, AAA or equivalent, 3 pieces

IP Degree: IP20

Operating Environment: Temperature: 0℃ to 40℃,Relative Humidity:<75%

Temperature Coefficient：0.2×(specified accuracy)/℃(<18℃ or >28℃）

Storage Environment:Temperature: -10℃ to 50℃,Relative Humidity:<85%

Dimensions:158×75×35mm

Weight:About 200g (including batteries)

3in1 Digital Multimeter Voltmeter Ammeter Ohmmeter DC

AC EMF Multimeter Automotive Tester EM5511

Note:

This package doesnot include batteries.

Due to new rules of China Post Air, parcels must not include batteries,

otherwise it will not get through the custom.

FEATURE >>>

1) High-performance

2) Display: 3 3/4-backlight LCD display, max.reading of 3999

3) Data-hold mode

4) Auto polarity indication

5) Manual range and autorange mode

6) Auto/manual power-off

7) Relative mode

8) Overload protection: "OL" shown on the LCD

9) Low battery indication

SPECIFICATION >>>

> Negative Polarity Indiaction: "-" displayed automatically

> Sampling Rate: 2-3 times/sec

> Operating Temperature: 0-40 degree C,<75%RH

> Storage Temperature: -30-60 degree C,<85%RH

> Operating Altitude: 0 to 2000 meters

> Battery: 9V,6F22 or equivalent

> Dimensions: 162x83x47mm

> Weight: about 310g (including battery and the holster)

Technical Specifications >>>
Accuracy is specified for a period of one year after calibration
and at 18 ℃ to 28 ℃, with relative humidity <75%. Normally,
accuracy specifications take the form of: ±([% of Reading]+
[number of Least Significant Digits])

ACCESSORIES >>>

Test Lead; Temperature probe; Battery; Users Manual; Holster

DC Voltage: