daf adblueobd2
1.ad-BlueOBD2 will override AD-Blue system instantly, it will stop the usage of ad-Blue liquid and disable Nox sensors.2.Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.3.ad-BlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
Cheap Ad-BlueOBD2 Emulator For DAF Trucks Verride AD-Blue System Instantly is a one of our daf adblueobd2 Tools, you can buy Cheap Ad-BlueOBD2 Emulator For DAF Trucks Verride AD-Blue System Instantly from foxwellpro.com.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150
images of Cheap Ad-BlueOBD2 Emulator For DAF Trucks Verride AD-Blue System Instantly
Cheap ad-BlueOBD2 Emulator for DAF Trucks
ad-BlueOBD2 Emulator for DAF Description:
ad-BlueOBD2 is a Plug & Drive Ready device to mulate working ad-Blue systems and NOx sensors on Trucks, which equipped with EURO 4/5/6 catalytic converter systems,
even with damaged ad-Blue SCR system. dBlueOBD2 is easy to install.
ad-Blue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use ad-Blue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your ad-Blue/DEF tank.
Top 5 Reasons to Get Ad-blue OBD2:
1. ad-BlueOBD2 is very easy to install. Just Plug it into OBD2 connector of Truck or bus and remove the fuses mentioned.
2. ad-BlueOBD2 will override AD-Blue system instantly, it will stop the usage of ad-Blue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. ad-BlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. ad-BlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug ad-BlueOBD2 from OBD2 connector.
Installation and Calibration for DAF Trucks:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (DAF)
6 - 15A
E357 - 20A
3. Plug ad-BlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of ad-Blue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
Package including:
1pc x ad-BlueOBD2 Emulator Box Interface
Go to Buy: Cheap Ad-BlueOBD2 Emulator For DAF Trucks Verride AD-Blue System Instantly