Original LAUNCH Creader CRP129 Professional Auto Code Reader Scanner

LAUNCH CRP129 OBD2 Scanner is an enhanced version from the general code reader. It has extensive vehicle coverage includes (from 1996 US-based, 2002 EU-based, 2005 Asian-based or newer OBD II & CAN domestic or import vehicles). It does not only work on the engine for full OBDII diagnosis but also supports comprehensive diagnosis on ABS/ SRS/ Transmission/Engine system and EPB SAS OIL service light resets functions. Moreover, it also build-in the added benefits of reading data streaming for the specific 4 systems and 3 resets functions; Help users avoid blind maintenance, save money and time. This scan tool is a must have and an excellent choice for mechanics.

1. 4 systems Diagnoses – Engine,Transmission, ABS, Airbag (SRS); 2. 3 Reset functions – oil reset, EPB reset and SAS reset​; 3. Support Full10 OBDII Functions; 4. Support 43+ prevailing models from Asia, America and Europe; 5. Oxygen sensor test, carbon canister test; 6. Dynamic data stream graphic display; 7. Support lifetime free online update; 8. Supoort diagnostic report printing; 9. Basic diagnostic functions: read DTCs, clear DTCs, read data stream; 10. 7 languages support: English, French, German, Spanish, Portuguese, Russian, Japanese.

LAUNCH CRP129 is a must-have diagnosis tool for car enthusiasts which amalgamates the best features of code scanners and professional mid-line scan tools with extensive system coverage of most 2006 US/EU-based and newer vehicles, more than 40 brands including all CRP123 supported vehicles, plus Asian: Daewoo; American: EU-Ford; Europe: Alfa-Romeo, Citroen, Dacia, Lancia, Mini, Peugeot, Renault, Vauxhall. Moreover, CRP129 is a highly cost-efficient small diagnostic device characterized for the special design of adding benefits of reading/clearing error codes and reading DataStream for 4 following systems:

1. A/T DIAGNOSIS(Transmission)

The automatic transmission warning light means there's an issue with the transmission, possibly the fluid temperature, fluid level, or pressure. The LAUNCH CRP129 can access and communicate with the transmission to tell you the running status of the sensors, to ensure a fast and accurate diagnostics of the existing or potential issues.

2. ENGINE DIAGNOSIS

By Reading, Clearing DTCs and viewing Live Data Stream, the CRP scan tool can help you easily pinpoint the cause of the Engine System problem and turn off the warning light related, thus ensuring the engine works properly, and enhancing its performance.

3. SRS DIAGNOSIS

By detecting every electronic parameters in SRS system to check their health status, this diagnostic tool can address the SRS potential issues timely to ensure your driving safety, and turn off the warning light of Airbag.The built-in DTC library (for codes definitions) will save you time searching online.

4. ABS DIAGNOSIS

By accessing to ABS system to read and erase DTCs and view real-time data flow within the system for detailed running conditions analyzing, this LAUNCH CRP129 scanner supports performing various bi-directional tests to check the operating conditions of Anti-lock Braking System, and turn off the warning light.

​

1. Oil Maintenance Reset

This function allows you to perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depend on the vehicle driving conditions and climate, and to turn off the warning light. The Oil Life Reminder must be reset every time the oil is changed, so the system can calculate when the next oil change is required.

2. EPB Reset

Reads and clears Electronic Parking Brake (EPB) Trouble Codes and turns off the ECU and brake warning light. If the brake pad wears the brake pad sense line, the brake pad sense line will send a signal sense line to the on-board computer to replace the brake pad. After replacing the brake pad, you need to reset the brake pad to clear the car alarms.

3. SAS Reset

Calibrates the Steering Angle Sensor (SAS) after the replacement. The steering angle sensor is a critical part that measures the steering wheel position angle and rate of turn. The SAS requires a reset to ensure proper calibration for adjusted alignment at any time for any reason.

This scanner supports all 10 test modes for OBD-II cars which are great for daily repair work. The table below describes the purpose of each mode of operation:

1 - Request Current Powertrain Diagnostic Data

2 - Request Powertrain Freeze Frame Data

3 - Request Emission-Related Diagnostic Trouble Codes

4 - Clear/Reset Emission-Related Diagnostic Information

5 - Request Oxygen Sensor Monitoring Test Results

6 - Request On-Board Monitoring Test Results for Specific Monitored Systems

7 - Request Emission-Related Diagnostic Trouble Codes Detected During Current or Last Completed Driving Cycle

8 - Request Control of On-Board System Test or Component

9 - Request Vehicle Information

10 - Request Emission-Related Diagnostic Trouble Codes with Permanent Status

​

1. Real-time DataStream Analysis

The LAUNCH CRP129 scanner can read data streaming for OBDII/ ENG / AT / ABS /SRS (Airbag), which shows the specific four systems live data readiness and allows you to analyze the real-time data stream via a waveform display, for quickly and accurately diagnostics.

2. DTC Lookup and Recording Data Function

1) DTC Lookup: Built-in DTC lookup library, Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) code, show definitions

2) Recording Data Function: Review or delete the recorded DTC, data streams, and freeze frame. You can check it on device diagnosis menu the “Review” part to check.

3. Lifetime Free Online Update

Not just featuring riches of easy-to-use diagnostic functions, the CRP129 scanner also gets access to free software updates via the internet-connected PC with multilingual support. You’re able to update the diagnostic software on your Windows 7/8/10/XP with a TF card.

4. Multiple Languages

Featuring an easy and intuitive button operation with sleek, rugged design which helps automotive repair professionals diagnose and repair vehicles more efficiently, CRP129 also offers multilingual menus and DTC definitions in English/French/German/etc., to meet the needs of users from different countries and cultures.

5. Plug and Play

CRP129 now has upgraded to the “plug-and-play” version with little booting time, so as to allow you to have a quick start for diagnostic work. Make everything you do feel smooth, intuitive and simple. Every technician can use it as a pro.

1. Asia:

Acura, Daewoo, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Subaru, Suzuki, Toyota

2. Europe:

EuroFord, Audi, BMW, Mini, Smart, VW, Benz, Volvo, Renault, Opel, Land Rover, Saab, Dacia, Seat, Peugeot, Citroen, Skoda, Porsche, Sprinter, Jaguar, Fiat, Vauxhall, Lancia, Romeo

3. USA:

USAford, Gm, Chrysler

4. AU:

Austford, Holden

Each of these 3 functions supports different cars.

Oil reset:

Brake reset:

SAS reset:

Screen: 4.0 inch TFT
Voltage Input: 9-18V
Connection: Standard 16PIN OBD Diagnostic Interface
Working Temperature: 0℃~55℃(32℉~ 131℉)
Storage Temperature: -20℃~70℃(-4℉~ 158℉)