2023 Autel MaxiSys MS908S Pro II Diagnostic Scan Tool Upgraded of MK908P/ MS Elite/ MS908S Pro ECU Programming Coding 36+ Services

Autel MS908S Pro II is Autel's latest high-end car comprehensive diagnostic scan tool based on the Android 10 operating system in 2023. MS908S Pro II not only inherits many advantages of Autel MS908S Pro/ MK908P/MK908 II in car fault diagnostic technologies, including powerful diagnostic functions, ECU programming specially designed for Mercedes-Benz and BMW, etc

Highlights of MS908S Pro II:

1. Upgraded of MK908P, MaxiSys Elite,MS908S Pro: Compare to Autel MK908P, Autel MS908S Pro II with more functions (Cloud Service/ Remote Expert (since 05-15-2021), wider vehicle coverage(support MACLAREN and TESLA diagnostic), and better technical s-upport (both online seller and US local agents support ). MS908S pro II same Functions as MaxiSys Elite But saves 500 Bucks.
2. J2534 ECU Programming for BMW/Benz: Equipped with 1000+ bucks valued J2534 programmer, Autel scanner MS908S Pro II is able to replace the existing software & firmware and program new ECUs (PCM, ECM) for specific BMW and Benz cars.
3. Advanced Online ECU Coding: Upgraded from Autel MS906BT/ MK906BT/ MK906 Pro/ MS906S/ MK906 Pro/ MS906, Autel MS908S Pro II with online ECU Coding for software modifications to a vehicle, allowing the use of functions not available in the car when it left the factory. Online coding for VW/ Audi / Porsche/ Benz/BMW.
4. VAG Guided & Refresh Hidden for VW/ Audi/ Skoda/ Seat: MS908S Pro diagnostic scan tool with VAG Guided functions with simple step-by-step procedures for quick and accurate car diagnostics. Refresh Hidden can change the settings already in the software and turn on or off some functions according to your needs.
5. Bidirectional Control / Active Tests: Active Tests to determine whether a specific subsystem or component in vehicles goes well.
6. 36+ Functions: Oil Reset, EPB, TPMS, BMS, Brake Bleed, DPF, Immo Keys, Injector Coding, SAS, Suspension, Throttle Matching, WIN DR ROOF, Seats, A/F, Lang Change, Headlamp, CHG Tire Size, TEC Learn, Cylinder, Trans Adaption, still growing.
7. OE-Level Full Systems: MaxiSYS MS908S Pro ii is able to access all available modules like Engine, ABS, SRS, Trans, EPB, Chassis, Steering, Emission System, Fuel system, TPMS and etc to read/clear codes, view live data in text or graph, retrieve freeze frame data, perform active tests and special functions for accurate diagnosis.
8. 10000+ Extensive Vehicle Coverage: KWP/CAN/UDS/OBDII, D-PDU/J2534/RP1210, 2018+ FCA SGW (AutoAuth); cover the overwhelming majority of vehicles made of US, Asian, and European.

5X Faster High-End Hardware:

[Android 4.4.2 >>> Android 10]: The operating system is upgraded from 4.4.2 to the fastest Android 10, which runs faster and smoother.
[Exynox 5260 >>> Qualcomm 660 CPU]: Core Processor has upgraded to Qualcomm 660 to enhance the diagnostic speed of the multitasking process.
[2G+64G >>> 4G+128 GB Memory]: More storage space to ensure the smooth multitask operation and keeps all the customer information, diagnostic data & files, and repair recordings.
[1024x768 >>> 2048x1536 Screen Resolution]: Provide you with a clearer and smoother viewing experience.
[8M >>> 16M Ream Camera]: The rear camera upgraded to 16 Megapixels, able to capture details more clearly and record clearer video to analyze problems.
[2.4G >>> 2.4G & 5G Wi-Fi Communication]: Upgraded to dual 2.4G & 5G Wi-Fi, far better in transmission rate, diagnostic distance, and anti-interference.

2023 Newly Added Functions:

Full Diagnostics for McLaren & Tesla: Autel MS908S Pro II can work on McLaren, Tesla new energy vehicles to complete full system diagnosis, which other scanners cannot do.
FCA Vehicle Access: For the FCA vehicle equipped with the Security Gateway module, MS908S Pro II diagnostic scan tool can help you to log in to the FCA account and perform diagnostic functions such as clearing DTCs, bi-directional tests, and calibrations. Compatible with Fiat, Chrysler, Alfa Romeo, etc.
Battery Tests (work with BT506): Combined with the BT506 battery detector, MS908S Pro II can scan the BMS module, detect the battery type, aging condition, and storage condition, and give appropriate maintenance advice. Note: BT506 needs extra purchases.
Compatible with MV105/MV108: This bundle includes Autel MV108 digital inspection camera. It can turn your MaxiSys MS908S Pro scanner into a video inspection scope, allowing you to examine difficult-to-reach areas normally hidden from sight.
Pre & Post-Scan: Pre- and post-scan reports keep your clients informed of the repair details and provide them with the evidence to settle insurance c~laims.
Scan VIN and Scan License: These two methods provide faster access to car information such as car manufacturer, model year, model, body type and code, engine code, and assembly location. This saves more time than manually entering the VIN.
Wi-Fi Printing: You can easily print the above diagnostic reports wirelessly from your diagnostic scanner via a Wi-Fi printer.
D-PDU/RP1210 New Protocols: Adds the latest D-PDU/RP1210 Protocols to cover newer vehicles.

Qualcomm 660 Octa-core processor (2.2GHz Quad-core A73 + 1.8 GHz Quad-core A53)

9.7-inch touchscreen Wi-Fi tablet

Bluetooth-enabled VCI/J2534 pass thru programming device with wireless range up to 70 meters

Rechargeable lithium battery delivers 7.5 hours of continuous performance on a single charge

Comprehensive Service Menu for direct access to most commonly performed service tasks

128G storage memory for maintaining of all needed brand diagnostics software

Android 10.0 operating system

Extensive vehicle coverage •Comprehensive Service Menu for direct access to most commonly performed service tasks

Read/Erase Codes on all available systems

Perform bi-directional active tests

Perform adaptations and coding View freeze frame data and view and graph systems live data
1-year free update



Note: The default language is English, if you need other languages(Spanish, German, Italian, French), you need to apply for activation separately.
NOTE: All service functions can not work on all cars. Please send us the VIN number (17 digits) to check compatibility before purchase.
NOTE: Currently, NONE of Autel scan tools can program ECUs for vehicles other than BMW & Benz. Autel MS908S Pro II has no IP Restrictions.

Advanced ECU Programming for Specific BMW & Benz

Autel MaxiSys MS908S Pro II with J2534 ECU programming device for replacing the existing software/firmware in the Electronic Control Units (ECU), programming new ECUs and fixing software-controlled drivability issues and emission issues for some BMW and Benz.

NOTE: ECU Programming applies to specific BMW & Benz vehicles ONLY.

Online ECU Coding for VW/ Audi / Porsche/ Benz/BMW

Autel MS908S Pro ii has the capability of ECU coding to optimally code your car by changing some settings to fit your needs, such as setting alarms, door locking, etc.
Access the ECU to make full use of the hidden features or disable the car’s annoying functions:1. Changing the color of interior lights 2. Switching on/off the auto hold, 3. Customizing dash kits 4. Activating the auto side mirrors folding functiond 5. Disable auto start-stop .
Provide excellent solutions for issues of drivability, power loss, fuel efficiency, etc. to improve the car’s performance.

Operating System	Android™ 10.0
Processor	Qualcomm 660 Octa-core Processor (2.2GHz Quad-core A73 + 1.8GHz Quad-core A53)
Memory	4GB RAM &128GB On-board Memory
Display	9.7 inch LED capacitive touch screen with 2048x1536 resolution
Connectivity	Wi-Fi (802.11 a/b/g/n/ac) USB 2.0 (2 USB TYPE-A ports and a Mini USB port) BT V5.0 + BR/EDR SD Card (Support up to 64GB) HDMI
Camera(rear)	16 Megapixel, AF with Flashlight
Sensors	Gravity Accelerometer, Ambient Light Sensor (ALS)
Audio Input/Output	Microphone Dual Speakers 3-Band 3.5 mm stereo/standard headset jack
Power and Battery	11000 mAh 3.7 V lithium-polymer battery Charging via 12 V AC/DC power supply with the temperature between 0°C and 45°C
Input Voltage	12V (9-24 V)
Power Consumption	6.5W
Operating Temp	0 to 50°C (32 to 122°F)
Storage Temp	-20 to 60°C (-4 to 140°F)
Dimensions(WXHXD)	300 mm (11.81”) x 220 mm (8.66”) x 50 mm (1.97”)
Weight	NW: 1.42 kg (3.13 lb.) GW: 8.052 kg (17.75 lb.)
Protocols	ISO 9142-2, ISO 14230-2, ISO 15765-4, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, CAN ISO 11898, Highspeed, Middlespeed, Lowspeed and Singlewire CAN,GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP 2.0, TP 1.6, SAE J1939,SAE J1708, Fault-Tolerant CAN