My Shopping Cart
V-a-gtacho USB Version V 5.0 V-A-G Tacho 5.0 for NEC MCU 24C32 or 24C64 Buy SE77-B Instead
  • V-a-gtacho USB Version V 5.0 V-A-G Tacho 5.0 for NEC MCU 24C32 or 24C64 Buy SE77-B Instead
  • V-a-gtacho USB Version V 5.0 V-A-G Tacho 5.0 for NEC MCU 24C32 or 24C64 Buy SE77-B Instead
  • V-a-gtacho USB Version V 5.0 V-A-G Tacho 5.0 for NEC MCU 24C32 or 24C64 Buy SE77-B Instead
  • V-a-gtacho USB Version V 5.0 V-A-G Tacho 5.0 for NEC MCU 24C32 or 24C64 Buy SE77-B Instead
  • V-a-gtacho USB Version V 5.0 V-A-G Tacho 5.0 for NEC MCU 24C32 or 24C64 Buy SE77-B Instead
V-a-gtacho USB Version V 5.0 V-A-G Tacho 5.0 for NEC MCU 24C32 or 24C64 Buy SE77-B Instead
V-a-gtacho USB Version V 5.0 V-A-G Tacho 5.0 for NEC MCU 24C32 or 24C64 Buy SE77-B Instead
V-a-gtacho USB Version V 5.0 V-A-G Tacho 5.0 for NEC MCU 24C32 or 24C64 Buy SE77-B Instead
V-a-gtacho USB Version V 5.0 V-A-G Tacho 5.0 for NEC MCU 24C32 or 24C64 Buy SE77-B Instead
V-a-gtacho USB Version V 5.0 V-A-G Tacho 5.0 for NEC MCU 24C32 or 24C64 Buy SE77-B Instead

V-a-gtacho USB Version V 5.0 V-A-G Tacho 5.0 for NEC MCU 24C32 or 24C64 Buy SE77-B Instead

V-A-G Tacho USB Version V 5.0 is a V-A-G Kombiinstrument / Immo box eeprom programmer and support Windows 7, Vista, Win XP, Win 98. Free shipping, and obdii365 always provide you the best price.
Item No. COBD21186 Price Down Notice
Out of Stock
Price:
US$47.99/ piece
Discount Price:
US$27.99/ piece 42%
Quantity:
  
Shipping:
Airmail Post
Estimated delivery time: 7-45 working days.See details»
Returns:
Return for refund within 7 days,buyer pays return shipping.Read details »
Support:
Online Chat WhatsApp Skype Ask a question

V-A-G Tacho USB Version V5.0
vagtacho usb version
Lastest version 5.0, support VDO with 24C32 or 24C64,our v-a-gtacho usb version 5.0 includes the functions of v-a-gtacho usb 4.52 , v-a-gtacho usb 4.0, and v-a-gtacho usb 3.5
V-A-G Kombiinstrument / Immo box eeprom programmer!
Windows 7, Vista, Win XP, Win 98 compatible software!
Support for some VDO dashes for VW from year 2009-2011 with NEC mcu and 24C32 or 24C64 eeprom memory. Important: These dashes requires ignition to be switched on with valid key of the car! Software version 5.0 works ONLY with interfaces which has got built-in programmer for Megamos ID48 transponders!
Built-in programmer for Megamos ID48 transponders! Pre-programming of TP2x transponders as dealer's keys with component security data which is read from immobiliser!
NEW key programming feature for V-A-G cars with VDO dashes on CAN bus! (TP2 and UDS protocols)

Note: TP22,23,24,25 transponders are required!

List of supported V-A-G cars:

Volkswagen

Golf 6, Jetta, Polo, EOS with VDO dash 2009 - 2011, note: not all dashes are supported!
Golf 5, Caddy, Touran, Jetta, EOS with VDO dash 2003 - June.2006
Golf 4, Bora with VDO or Motometer/Bosch dash: 1997-2003
Beetle with Marelli dash: 1998 - 2005
Passat, Jetta, with VDO, Marelli or Motometer dash: 1997-2004
Polo with VDO or Motometer dash: 1999-2006 (1999-2002 mileage change only)
Sharan with VDO dash: 2000-2004(mileage change only)
Caddy, Lupo with VDO or Motometer dash 1997 - 2002(mileage change only)
Transporter with VDO dash 1998 - 2000
LT35 ( Temic immo box) 1999-2003 (pin code read only)
Gol ( Kostal immo box) 1999-2003 (pin code read only)

Seat

Altea, Leon, Toledo with VDO 2003 - 6/2006
Leon, Toledo, Cordoba, Ibiza with VDO or Motometer dash 1997-2003
Alhambra with VDO 2000 - 2004(mileage change only)
Inca with VDO or Motometer 1997 -2000(mileage change only)

Skoda

Octavia II with VDO dash 2005 - 6/2006
Octavia, Fabia with VDO dash 1997 - 2004

Audi

A3 VDO dash 2003 - 2005
A3,A4,A6 VDO dash 1997 - 2000
A3,TT,A6 Magnetti Marelli dash 1998 - 2003
A4 Bosch dash 2000 - 2008 - Read/write of encrypted data with V4.5!
A4,A6,A8 1995-1999 (immo box - read pin code)

V-a-g tacho usb version software 4.52

V-a-gtcho 4.52 is upgraded from v-a-g tacho usb4.0, Upgrade V-a-gtacho usb 4.0 interface with Programmer for Megamos ID48 chips, our v-a-gtacho version 5.0 has upgraded directly ,includes the functions for v-a-gtacho usb 4.52
The benefits with this upgrade are:
Your V-a-gtacho interface will works with software vesrion 5.0 for the new VDO dashes with UDS protocol from year 2009+
Programming of new keys to V-A-G cars which are into FAZIT database.
Works with cars which has got locked key programming channel, or pin code is not accepted.
No need to wait up to 30 minutes for the key programming procedure.
With this upgrade, V-a-gtacho can program the new key in one minute

V-a-gtacho version 4.0

V-A-G Kombiinstrument / Immo box eeprom programmer!
Windows 7, Vista, Win XP, Win 98 compatible software!
Works on any computer which has got USB port!
Most of V-A-G dashes from 1997 to 2006 are supported!
Direct programming of Megamos ID48 (JMA-TP08) chips to V-A-G cars on CAN bus from November 2003 to June 2006
Transponder Maker Pro is required for pre-programming of these chips.
Note: TP22,23,24,25 transponders are NOT required!

1. Main functions:

Read ecu info
Read pin code
Change mileage
Read eeprom
Programmer new key
Write eeprom
Clear ecu errors
Viem memory buffer

2. List of supported V-A-G cars:

Volkswagen

Golf 5, Caddy, Touran, Jetta, EOS with VDO dash 2003 - June.2006
Golf 4, Bora with VDO or Motometer/Bosch dash: 1997-2003
Beetle with Marelli dash: 1998 - 2005
Passat, Jetta, with VDO, Marelli or Motometer dash: 1997-2004
Polo with VDO or Motometer dash: 1999-2006 (1999-2002 mileage change only)
Sharan with VDO dash: 2000-2004(mileage change only)
Caddy, Lupo with VDO or Motometer dash 1997 - 2002(mileage change only)
Transporter with VDO dash 1998 - 2000
LT35 ( Temic immo box) 1999-2003 (pin code read only)
Gol ( Kostal immo box) 1999-2003 (pin code read only)

Seat

Altea, Leon, Toledo with VDO 2003 - 6/2006
Leon, Toledo, Cordoba, Ibiza with VDO or Motometer dash 1997-2003
Alhambrawith VDO 2000 - 2004(mileage change only)
Inca with VDO or Motometer 1997 -2000(mileage change only)

Skoda

Octavia II with VDO dash 2005 - 6/2006
Octavia, Fabia with VDO dash 1997 - 2004

Audi

A3 VDO dash 2003 - 2005
A3,A4,A6 VDO dash 1997 - 2000
A3,TT,A6 Magnetti Marelli dash 1998 - 2003
A4 Bosch dash 2000 - 2005
A4,A6,A8 1995-1999 (immo box - read pin code)

3. How to programmer keys with v-a-g tacho usb 4.0

Switch ON ignition with any key new or old, no mater which one.
Start software, select "VDO NEW - CAN bus" from menu.
Press "Connect Selected ECU" button, after 5 seconds the data of the dash will be shown on screen.
Press "Program New Key", software will read data from the dash and after few seconds a new window will be open.
See the picture. ID numbers of the transponders which are stored into memory will be shown.

vag-tacho-v40-key-programming-software

This is TMPro module#146 window. Insert transponder key with new Megamos ID48 chip and program it.

Press "Add Key" and a message will be shown. Switch ON ignition with key which you want to program! The key may be new - already programmed with TM Pro, or old - key which has been used with the same car! V-a-gtacho will check the key. If this key is already programmed to the car, or it is from another car, V-a-gtacho will show warning message on screen and won't program this key!

vag-tacho-v40-usb-software-program-key
If everything is ok, V-a-gtacho will add the new key into the data of immobilizer and will show ID number of new key on screen. See the red mark on the picture. Now you are ready to program the new transponder key into the immobilizer. Press "Write Keys" to complete programming procedure !

vag-tacho-v40-immobilizer

Press "Write Keys" and the warning window will be open. If you are sure that everything is all right, press"Continue", otherwise press "Cancel". If you press "Cancel" nothing will happens, and the data won't be written into immobiliser. After pressing "Continue" V-a-gtacho will writes the data into immobiliser after few seconds. The dash will be reset, and the programming procedure will be completed!
This is the last step, after this the new data will be written into immobiliser! If you have marked and erased some keys, they will NOT works anymore!

vag-tacho-immobilizer-function
Press "Write Keys" and the warning window will be open. If you are sure that everything is all right, press"Continue", otherwise press "Cancel". If you press "Cancel" nothing will happens, and the data won't be written into immobiliser. After pressing "Continue" V-a-gtacho will writes the data into immobiliser after few seconds. The dash will be reset, and the programming procedure will be completed!
This is the last step, after this the new data will be written into immobiliser! If you have marked and erased some keys, they will NOT works anymore!
This picture shows the final V-a-gtacho window. If you have switched ON ignition with key which is already programmed by TMPro, the warning lamp of immobiliser on the dash will be turned off. The new key is already stored into immobiliser and you can start engine!
If the immobiliser's warning lamp on the dash is still flashing, there is some error in programming procedure, you can check the transponder key - see how to do this on the next picture!

vag-tacho-usb-k-can-connection
Switch ON ignition with the key which you want to test! Start software, select "VDO NEW - CAN bus" from menu, and press"Transponder Check". V-a-gtacho will connects immobiliser. Press "Read ECU Info" button, and wait about 10 seconds. The information about this transponder key will be displayed on screen, see the next picture. You can press "Read ECU Info" to testing of transponder key again. This procedure is optional, and is not required when programming the new keys.

vagtacho-transponder-check
Switch ON ignition with the key which you want to test! Start software, select "VDO NEW - CAN bus" from menu, and press"Transponder Check". V-a-gtacho will connects immobiliser. Press "Read ECU Info" button, and wait about 10 seconds. The information about this transponder key will be displayed on screen, see the next picture. You can press "Read ECU Info" to testing of transponder key again. This procedure is optional, and is not required when programming the new keys
Transponder variable part and transponder locked must be "YES", otherwise there are errors in programming of the new key with TMPro!
Transponder fixed part must be "YES" otherwise the key is still not programmed into immobiliser, or V-a-gtacho programming procedure is not completed successfully. In case of such error, repeat whole programming procedure again with another new transponder! All parameters must be set "YES"!

vagtacho--v40-immo-test
Package:
vag-tacho-50-1
vag-tacho-50-2
vag-tacho-50-3

V-a-gtacho USB Version V 5.0 V-A-G Tacho 5.0 for NEC MCU 24C32 or 24C64 Buy SE77-B Instead order tips 1

More More More More More More
  • Related Items
  • Recommond Tools
  • Hot Sale
  • On Sale
  • New Arrivals
  • Freeshipping Items