Thermostat Digital Temperature Controller KT3008 KT3009 for Incubator Brooder Regulator Switch Control AC110V 220V NTC Sensor

• 
  Mini temperature controller with socket.

• 
  With clear LED display for better readability.

• 
  Wide temperature measuring range.

• 
  Heating or cooling control.

• 
  All parameters setting can be saved after short circuit.

• 
  Directly power output.

• 
  high Control precision 0.1 centigrade

• 
  Can be used for domestic freezer, refrigerator,industrial chiller, steamer, industrial

Parameters

• 
  The max current of output is 10A (110Vac/220Vac). In order to make sure the controller work under high performance condition. We recommend to use maximum power ≤ 800W when you use resistive load such as heating rod, heating pad, electric water heater etc. We recommend to use maximum power ≤ 275W when you use inductive load such as compressor , heat pump etc.

• 
  The sensor can not put in the water for a long time, if you need that, please contact us.

• 
  1 x Thermostat

• 
  1 x English Manual

KT3008

Key Operation Instruction

• 
  In normal working status, screen display real time temperature. press UP key once. Screen display start temperature.press Down key once. Screen display stop

• 
  temperature.

• 
  Hold UP key. led flash,press UP or Down to change start temperature.

• 
  Hold Down key. led flash, press UP or Down to change stop temperature.

• 
  When set start temperature ≥ stop temperature, the controller will work in cooling mode.You can use cooler as load.

• 
  For example, set start temperature 35 °C ， stop temperatre 32 °C .Cooler work when temperature ≥ 35°C,Cooler stop when temperature≤32°C

• 
  When set start temperature ≤ stop temperature, the controller will work in heating mode.You can use heater as load.

• 
  For example, set start temperature 45 °C ， stop temperatre 60 °C .Heater stop when temperature ≥ 60°C,heater work when temperature≤45°C

• 
  When the Led display LLL, check the sensor connected well or change the sensor.

• 
  When the Led display HHH, the temperature is Beyond measurable range of sensor.

KT3009

• 
  In normal working status, screen display real time temperature. press UP key once. Screen display start temperature.press Down key once. Screen display stop temperature.

• 
  Press SET key. Led display P0, press UP or Down to switch code P0 P1 P2 P3.